Home » Product » Wind Turbine Lifting Equipment » Wind Turbine Hydraulic Wheeled Tower Crane
inquiry form

QLY9096 Wind Turbine Hydraulic Wheeled Tower Crane

The QLY9096 wind turbine hydraulic wheeled tower crane is a kind of mobile product developed for the construction of 2.5MW wind turbine. It is a scientific research achievement realized by our research personnel by utilizing more than 20 years of experience in designing fully hydraulic wheeled vehicles and cranes as well as by combining wind power construction characteristics.

This product meets the requirement of lifting wind turbines with capacity no more than 2.5MW. The maximum lifting height is 96 meters and the maximum lifted mass is 90 tons. For the modified product, the two parameters are 115 meters and 65 tons respectively.

The chassis of this wind turbine hydraulic wheeled tower crane is provided with mature hydraulic independent suspension system and independent steering system. Tires can be adjusted within the range of ±300mm according to the road conditions, which meets the requirement of traveling on complex roads. Taking full account of the hills and deserts landform of wind power sites, we adopt the tower body of three-level telescoping and the boom of three-level folding. Our product can travel with boom lifted on longitudinal slope with gradient of 20%. The vehicle is 18 meters in length and 4.5 meters in width, which meets the requirement of traveling on 5-meter-wide road.

Specifications of QLY9096 Hydraulic Wheeled Tower Crane
Item Unit Design value Remark
Rated load moment t.m 1400
Lifted mass Max. rated lifted mass t 90
Lifted mass at max. working radius t 14
Working radius Max. working radius m 45
Min. working radius m 11.6
Working radius at max. lifted mass m 11.6-15.6
Max. lifting height m 96
Hoisting mechanism Raising speed Magnification α=8 Hydraulic variable speed control
Speed m/min 0~15
Lifted mass t 0~90
Min. stable lowering speed m/min 1
Rated working pressure MPa 29
Slewing mechanism Slewing speed r/min 0~0.3 Hydraulic variable speed control
Rated working pressure MPa 15
Luffing mechanism Luffing speed min 4.0 (entire process) Hydraulic variable speed control
Rated working pressure MPa 30
Auxiliary mechanism Auxiliary speed m/min 1.5 Hydraulic variable speed control
Rated working pressure MPa 14.00
Lifting mechanism Lifting speed m/min 0~0.3 Hydraulic variable speed control
Rated working pressure MPa 22.00
Cable-stayed mechanism Cable-stayed speed m/min 7.40 Hydraulic variable speed control
Rated working pressure MPa 15.00
Traveling parameters Travel speed km/h 0-4
Longitudinal slope % ≤20
Transverse slope % ≤7
Road width m >5
Total mass (excluding counterweight) t 229
Total power KW 330
Noise level dB ≤90

Related Names
Mobile Construction Crane | Truck Mounted Crane | Level Luffing Crane Manufacturer

Inquiry Form
Other products